Home
   

  My projects
  DAC & Transport
  Headphone Amplifier
  Amplifier
  Loudspeakers
  Cables
    Introduction
    Test systems
    Candidates
    Results
  AV System
  CAR Hi-Fi

  Other projects

   
     

As I am always working for a better page, it is possible to get dangling links for a few days

Andrea Ciuffoli

email:
webmaster@
audiodesignguide.com
 

web hosting

 

Cables - Candidates

photo (click to enlarge) manufature and models materials price system n. 1
tubes trans.
soon Sina Chorda Analog by Phoenix Control System srl. unknown no more available 275 800
soon 1994's Reference Monitor Cable by the German In-akustik

 

99.9999% pure OF-Copper, polyethylene insulation, unshielded, with Audio Note AN-P heavily silver-plated non-magnetic RCA plug with Teflon insulation (as used in their top-of-the-line AN-Vx and SOGON interconnects).
no more available 285 550
My standard cable Tasker C184
2 x 2 x 0,22 mm²
Twisted pair shielded plaited cable
85% shielded - tinned copper
Conductors in tinned copper
Conductor insulation in PVC
Cores stranded with pitch 30 twist/mt.
about 20$ 225 250
Rapunzel by Filippo Punzo

 

For 80cm use 3m of UTP Cat 5
Autoshield technique
DIY guide  (1)
DIY guide (2)
about 20$ 225 250
RS1 Silver by Slinkylinks Conductors are 96% insulated in air
Cable uses 99.9999% pure silver conductors
Metal content is minimised to reduce harmful capacitance distortion
£169.12 (Excluding: VAT at 17.5%)  for 0.75m 232 300
SynchestraRef by Luminous Audio Bullet Plug adjusts to any RCA socket
Jacket of highly inert fine-mesh fiberglass cloth
Ultra-high quality 20 -gauge ONO 6/9s (99.99998) single-crystal copper conductors
449$ for a 0.5m
499$ for a 1m

 

250 500
Tao Analogue Interconnect  by Q-Audio Solid core binary  insulated with a single waxed serve (wrap) of pure filament silk and covered with a pure filament silk braided jacket.
Each cable comprises a parallel quad geometry with the four conductors cut from a contiguous length of wire. The conductor pairs for signal and ground are paired using wires of opposing directions.
400$ for 0.35m and 575$ for 0.75m 260 600
Signature  by Crystal Clear Audio This cables uses the Eichmann Bullet connectors.
Solid wire is superior to stranded wire.the
The molecular structure of Copper carries signals better than Aluminum and Silver better than Copper and Gold
475$ for 0.5m 230 300
Chameleon Silver Plus by Chordhord Triple conductor set, floating shield configuration Silver-plated oxygen free coppper conductors and shield
Teflon dielectric
Silver-plated RCA plugs
£89.00 for 1m 235 300
Silver Resolution Reference Analog Interconnects by SignalCable
 

4 conductors, 80 5N Pure Silver strands (each channel)
Insulation for each conductor - thin wall Teflon tube
Effective gauge size per channel - 21awg
Shield - braided 5N Silver Plated OFC

Outer Jacket - Teflon Tape
Geometry - Internal Twisted, Cross Linked

$189.00 for 2 feet 250 450
SilverMIca Zero-One by Voodoo Cable

 

 

High purity solid Silver Conductors with  patented real Mica Insulation.
Seperate Positive/Negative Run each Channel.
Also for XLR-Application. Foil/Braid double shielded for effective RF-EM rejection
145,00 - 250,00 EUR per terminated 1 Meter Set. XLR / 1 Meter Set: 160,00 EUR 275 600
Micro Purl Silver by Alpha-Core, Inc. Patented strip-line signal carriers, purled in line with the extrusion brings excellent RF noise rejection without a dedicated shield.
99.99% pure solid fine silver.
85$ for 0.5m
127$ for 1m
2 -  -0
Legend IV by Legend Audio unknown 515$ for 1m 2-  -0