THE LA FOLIA COLLECTIVE DEVELOPMENT PROJECT
The crossover design
BUILDING INSTRUCTIONS
© 1996. All rights reserved on text, photos, diagrammes, etc, unless otherwise stated.
The crossover will cut at 500 hz, this will help the distribution
of the sound in the woofer. A coil with 0.95 mH cuts off the bass over
500 hz, 6dB per octave. A condensator of 105 microF cuts off the highs on
the low side 6 dB per octave. Here there is space to check out the
exotic and more expensive types to see if this makes any difference,
I was not able to find anything other than the normal grade stuff.
To have a 105 microF just connect two condensators in parallel, as in
the diagramme.