|
The AL-IIIPlus will likely change your assumptions about what a high-performance
loudspeaker system can and should be. This is not merely another reworking of the time-worn,
cone-and-dome design. Instead, virutally all music is reproduced by a single, 48-inch,
full range ribbon driver. Only the lowest bass octaves are handled by the downward-firing
woofer. This eliminates crossover distortions, phase anomalies, and box colorations inherent
in most conventional designs. And, because the AL-IIIPlus is a dipolar transducer,
with sound radiating to front and rear, the overal effect is astonishingly realistic. Listen
to the AL-IIIPlus, and you will experience transparency, imaging, vivid detail,
and a sense of depth and spaciousness never before encountered outside the concert hall.
|
- 48" full range ribbon driver
- 10" down-firing woofer
- Hand matched oak in natural or black
- Made in Lynnwood, WA U.S.A.
|
- Anechoic Frequency Response: 34Hz to 20kHz +/-3dB
- Impedance: Nominal 4 ohms
- Sensitivity: 86 dB ref. to 1 watt at 1 meter
- Crossover: 150 Hz
- Ribbon Driver: 48-inch dipole ribbon
- Woofer: 10-inch Quasi-butterworth 3rd order aligned
woofer system, which fires downward in a circular pattern.
- Recommended Power: Up to 500 watts per channel
65 watts minimum, 8 ohm rates.
- Net Weight: 80 lbs. each
- Shipping Weight: 96 lbs. each
- Dimensions: 14.5Wx16.5Dx72.5H
|
